Giantz 5-Unit Charcoal Garage Shelving System - 150kg Per Shelf, Boltless, 5×1.5m Complete Set
Giantz 5-Unit Charcoal Garage Shelving System - 150kg Per Shelf, Boltless, 5×1.5m Complete Set
In Stock - Ships in 24-48 hours.
Couldn't load pickup availability
Five matching racks. 3.5 metres of wall covered. One Saturday morning.
The difference between a cluttered garage and an organised one usually isn't more storage - it's matched storage. Five identical charcoal racks lined up along a garage wall, each unit at 70 centimetres wide, creates 3.5 metres of continuous shelving in a colour that actually looks deliberate. Not cheap-black, not silver-grey - matte charcoal, which reads as intentional in a way that mismatched or generic finishes never do.
Each unit carries 150kg per shelf across five tiers - enough for full toolboxes, paint tins, bulk bin storage, automotive supplies and the seasonal gear that clogs every garage. The boltless system clicks together without tools, and with five units you're looking at one focused assembly session rather than five separate afternoon projects.
- 🏭 5 matching units - 3.5m combined wall coverage - creates a coherent, professional storage wall across a full garage bay
- ⚖️ 150kg per shelf (5 tiers per unit) - handles toolboxes, paint, storage bins and automotive supplies with real headroom
- 🔩 Boltless assembly - no tools required - click-and-slot system; allow 25–35 minutes per unit
- 📐 Adjustable shelf heights - reconfigure each tier independently without disassembling the frame
- 🏗️ Middle support beam on each unit - prevents shelf sag under asymmetric loads; the structural detail cheaper racks skip
- 🔄 Side-by-side expandable design - position all five along one wall, or spread them across multiple zones
- 🎨 Matte charcoal powder-coated frame - anti-rust finish that holds its colour in typical Australian garage conditions
- 📦 Compact 70 × 30 × 150cm per unit - fits standard Australian suburban garages without dominating the floor plan
Honest note on shelf boards.
The shelf boards on this system are MDF - the standard spec for this price tier, and reliable in standard enclosed garages. MDF is not suitable for open-air sheds, areas with ongoing moisture or water ingress, or storing wet equipment directly on the surface. For a standard rollerdoor garage, these boards will perform reliably for years. For wet or high-humidity environments, our all-steel shelving range is the better fit.
Where this sits in the SmartStorage.au Giantz range.
This 5×1.5m system is the accessible entry into five-unit coverage - the right choice when you want a complete, matched garage system at a compact 70cm width per unit and 150kg per shelf capacity. If your loads are heavier, or you need the additional 30cm width and 30cm height of the 1.8m units, our 5×1.8m charcoal system steps up from here with 200kg per shelf and 900cm of total height.
Five matching racks. 3.5 metres of wall covered. One Saturday morning.
The difference between a cluttered garage and an organised one usually isn't more storage - it's matched storage. Five identical charcoal racks lined up along a garage wall, each unit at 70 centimetres wide, creates 3.5 metres of continuous shelving in a colour that actually looks deliberate. Not cheap-black, not silver-grey - matte charcoal, which reads as intentional in a way that mismatched or generic finishes never do.
Each unit carries 150kg per shelf across five tiers - enough for full toolboxes, paint tins, bulk bin storage, automotive supplies and the seasonal gear that clogs every garage. The boltless system clicks together without tools, and with five units you're looking at one focused assembly session rather than five separate afternoon projects.
- 🏭 5 matching units - 3.5m combined wall coverage - creates a coherent, professional storage wall across a full garage bay
- ⚖️ 150kg per shelf (5 tiers per unit) - handles toolboxes, paint, storage bins and automotive supplies with real headroom
- 🔩 Boltless assembly - no tools required - click-and-slot system; allow 25–35 minutes per unit
- 📐 Adjustable shelf heights - reconfigure each tier independently without disassembling the frame
- 🏗️ Middle support beam on each unit - prevents shelf sag under asymmetric loads; the structural detail cheaper racks skip
- 🔄 Side-by-side expandable design - position all five along one wall, or spread them across multiple zones
- 🎨 Matte charcoal powder-coated frame - anti-rust finish that holds its colour in typical Australian garage conditions
- 📦 Compact 70 × 30 × 150cm per unit - fits standard Australian suburban garages without dominating the floor plan
Honest note on shelf boards.
The shelf boards on this system are MDF - the standard spec for this price tier, and reliable in standard enclosed garages. MDF is not suitable for open-air sheds, areas with ongoing moisture or water ingress, or storing wet equipment directly on the surface. For a standard rollerdoor garage, these boards will perform reliably for years. For wet or high-humidity environments, our all-steel shelving range is the better fit.
Where this sits in the SmartStorage.au Giantz range.
This 5×1.5m system is the accessible entry into five-unit coverage - the right choice when you want a complete, matched garage system at a compact 70cm width per unit and 150kg per shelf capacity. If your loads are heavier, or you need the additional 30cm width and 30cm height of the 1.8m units, our 5×1.8m charcoal system steps up from here with 200kg per shelf and 900cm of total height.
