Giantz 2-Pack Steel Garage Shelving - 1.8m Wide, 200kg Per Shelf, All-Steel Boards | Workshop & Warehouse Rack
Giantz 2-Pack Steel Garage Shelving - 1.8m Wide, 200kg Per Shelf, All-Steel Boards | Workshop & Warehouse Rack
In Stock - Ships in 24-48 hours.
Couldn't load pickup availability
One purchase. One wall covered. Zero compromise on what the shelves can hold.
Most garage shelving bundles give you width by combining units with MDF shelf boards - which works well for boxes, bins and lighter household gear. This Giantz 2-pack takes a different approach. At 90cm wide each, the two units sit side by side to create 1.8 metres of continuous all-steel shelving - and crucially, every shelf board is solid steel, not MDF. That matters when you're loading wet camping gear, engine parts, paint tins, automotive fluids, or anything else that would eventually damage a board that can absorb moisture.
200kg per shelf is the real number.
Not the combined total. Not a marketing figure. Each individual shelf supports 200 kilograms of evenly distributed load - which is enough for a full engine block, a loaded tool chest, stacked bulk hardware, or four large 20L containers sitting flat. With four tiers per unit and two units in the pack, you're looking at eight shelves of serious capacity across your garage wall. The reinforced middle support beam on each unit adds lateral stability under asymmetric loads, keeping shelves flat under real-world working conditions.
- 🔩 All-steel shelf boards - no MDF - won't warp, swell or delaminate in humid or damp garage conditions
- ⚖️ 200kg per shelf (800kg per unit) - heavy-duty capacity for workshop tools, engine parts, automotive supplies and bulk equipment
- 📐 1.8m combined coverage (2 × 90cm units) - full-wall shelving in one purchase, position side by side or in separate zones
- 🔧 Converts to workbench configuration - separate vertically stacked units into lower workbench-height platforms for assembly tasks
- 🏗️ Reinforced middle support beam - critical stability under uneven loading and concentrated heavy items
- 📏 Adjustable shelf heights - reconfigure each tier independently without disassembling the frame
- 🔩 Boltless assembly - no tools required - clicks together in approximately 30 minutes per unit
- 🎨 Powder-coated steel frame - anti-rust finish designed for garage and workshop environments
Where this fits in your storage setup.
If you already have household garage shelving for bins, boxes and seasonal gear, this Giantz 2-pack is the upgrade for the dedicated workshop zone - the wall where the serious equipment lives. It suits home mechanics, tradies with a home workshop, anyone building a proper tool setup, or commercial storage applications where 200kg per shelf is the baseline rather than the ceiling.
One purchase. One wall covered. Zero compromise on what the shelves can hold.
Most garage shelving bundles give you width by combining units with MDF shelf boards - which works well for boxes, bins and lighter household gear. This Giantz 2-pack takes a different approach. At 90cm wide each, the two units sit side by side to create 1.8 metres of continuous all-steel shelving - and crucially, every shelf board is solid steel, not MDF. That matters when you're loading wet camping gear, engine parts, paint tins, automotive fluids, or anything else that would eventually damage a board that can absorb moisture.
200kg per shelf is the real number.
Not the combined total. Not a marketing figure. Each individual shelf supports 200 kilograms of evenly distributed load - which is enough for a full engine block, a loaded tool chest, stacked bulk hardware, or four large 20L containers sitting flat. With four tiers per unit and two units in the pack, you're looking at eight shelves of serious capacity across your garage wall. The reinforced middle support beam on each unit adds lateral stability under asymmetric loads, keeping shelves flat under real-world working conditions.
- 🔩 All-steel shelf boards - no MDF - won't warp, swell or delaminate in humid or damp garage conditions
- ⚖️ 200kg per shelf (800kg per unit) - heavy-duty capacity for workshop tools, engine parts, automotive supplies and bulk equipment
- 📐 1.8m combined coverage (2 × 90cm units) - full-wall shelving in one purchase, position side by side or in separate zones
- 🔧 Converts to workbench configuration - separate vertically stacked units into lower workbench-height platforms for assembly tasks
- 🏗️ Reinforced middle support beam - critical stability under uneven loading and concentrated heavy items
- 📏 Adjustable shelf heights - reconfigure each tier independently without disassembling the frame
- 🔩 Boltless assembly - no tools required - clicks together in approximately 30 minutes per unit
- 🎨 Powder-coated steel frame - anti-rust finish designed for garage and workshop environments
Where this fits in your storage setup.
If you already have household garage shelving for bins, boxes and seasonal gear, this Giantz 2-pack is the upgrade for the dedicated workshop zone - the wall where the serious equipment lives. It suits home mechanics, tradies with a home workshop, anyone building a proper tool setup, or commercial storage applications where 200kg per shelf is the baseline rather than the ceiling.
