SpanBilt Garden Shed 2.1m Wide - Double Hinged Doors, Australian Made

FAQ:

Q: How does the F64-D compare to the F36-S - which one should I choose?

A: These two sheds solve different problems. The F36-S is 1.07m wide with a side entry door - it's designed for very narrow passages where you might have 1.2–1.5m of clearance to work with. The F64-D is 2.1m wide with front-entry double doors - it needs the 2.1m width available but gives you significantly more floor space (nearly three times the footprint of the F36-S) and a much wider door opening at 132cm vs 98cm. If your installation spot is narrow but long (like a side passage), the F36-S is the right fit. If you have the 2.1m width available and want maximum storage and access, the F64-D is the better choice. If you're still not sure, send us your site dimensions via chat and we'll give you a straight recommendation - takes two minutes

Q: Will this shed fit a ride-on mower or is it only suitable for push mowers?

A: The 132cm door opening will accommodate most compact ride-on mowers - standard zero-turn and garden tractor models are typically 90–120cm wide, which fits through the double door opening with room on each side. The shed depth (1.41m) is the key consideration: most compact ride-on mowers are 150–180cm long, which means the mower will sit at the shed door rather than fitting inside fully. If a ride-on mower is your primary purpose, we'd recommend considering a wider, deeper shed from the SpanBilt range. For push mowers, standard lawn tractors (compact size), bikes, garden tools and outdoor equipment, the F64-D has more than enough room. If you want to check your specific mower model's dimensions against the shed interior, reach out - we're happy to help you confirm before ordering.

Q: Do I need council approval for this size shed in Australia?

A: The F64-D has a floor area of approximately 2.96m² (2.1m × 1.41m) - well under the exempt development threshold in every Australian state and territory. As a guide: NSW allows outbuildings under 20m² as exempt in most residential zones; Victoria under 10m² in most cases; Queensland, WA, SA and Tasmania each have their own LGA thresholds but typically allow structures under 10m² without approval. At under 3m², this shed falls comfortably under every state threshold. You still need to comply with setback requirements - typically 600mm to 1m from fence lines - so check your LGA's specific rules before installation. Strata and body corporate properties may require written approval from the owners corporation regardless of size.

Q: What base does the F64-D need - does it have to be concrete?

A: A level, solid base is required. Concrete is strongly recommended - even a small concrete pad poured to the shed's footprint dimensions provides the flattest base and the most secure anchor point for the included masonry anchors. Compacted and levelled pavers or a concrete slab are both acceptable alternatives. The shed must not be installed on bare soil - an unlevel base leads to panel alignment problems and door operation issues over time. The included masonry anchor kit is designed for concrete or masonry substrates; if you're installing on pavers, ensure they're bedded in sand or mortar and won't shift. Contact us before pouring if you want the anchor bolt specifications in advance - we can provide the layout template so your concretor can set them during the pour.

Q: Is this shed suitable for coastal areas and high-humidity environments?

A: The F64-D is wind-rated to Region A, B and C under AS/NZS 1170.2, which covers most coastal areas of Australia outside tropical cyclone zones. The high-tensile Australian standard steel and zinc-channel construction are designed for durability in the range of conditions Australian backyards throw at sheds - including coastal humidity and UV exposure. For properties within 1km of the coast in cyclone-designated areas (tropical QLD, northern WA), the optional C2 cyclonic upgrade kit provides the additional tie-down certification for those wind loads. If you're in a cyclone-prone area, reach out before ordering and we'll confirm the right configuration for your location.